A: STAHL ELECTRICAL EXPLOSION PROTECTION EQUIPMENTS & SPARES
A1 LIGHTINGS:- Lighting Fittings for:
• Fluorescent Lamps.
• Emergency Lightings.
• Bulk Head Lightings.
• Pendant Lightings.
• Flood Lightings.
• Head Lamps Lightings.
• Heli-deck Lightings.
• Mounting Accessories.

A2: INSTALLATION EQUIPMENTS.
• Installation Switches.
• Junction Boxes.
• Terminal Boxes.
• Plugs & Sockets.
• Couplers.
• Couplers Sockets.
• Socket Outlet Assemblies.
• Plug Connectors.
• Maintenance Socket Isolators.

A3: CONTROL STATIONS & CONTROL DEVICES.
• Position Switches.
• Control Equipment for Panel Mounting.
• Measuring & Monitoring Equipment for Panel Mounting.
• Grounding Systems & Grounding Monitoring Devices.

A4: SIGNALLING DEVICES.
• Visual Signalling Devices.
• Audible & Visual Signalling Devices.
• Audible Signalling Devices.

A5: COMPONENTS FOR HEATING SYSTEMS.
• Junction Boxes for Heat Tracing.
• Temperature Controller & Limiter.
• Thermostat.

A6: LOAD DISCONNECT SWITCHES & MOTOR STARTERS.
• Safety Switches.
• Load and Motor Switch Gear.
• Motor Protection Circuit Breaker.
• Standard Motor Starters.
• Direct On-Line Motor Starters.
• Star Delta Starter Combinations.
• Reversing Starter Combinations.

A7: APPLICATIONS LOW VOLTAGE SYSTEMS.
• Power Distribution.
• Lighting & Heating Panels.
• Machine Controls.
• Battery Boxes.
• UPS Uninterrupted Power Supply.
• Pressurised Apparatus.

A8: COMPONENTS FOR SYSTEMS SOLUTIONS.
• Ex d Technology.
• Ex e Technology.
• Components for use in Ex d and Ex e Enclosures.

A9: INSTALLATION EQUIPMENTS & ACCESSORIES.
• Cable Glands.
• Cable Glands with Strain Relief.
• Cable Glands in Brass.
• Breathing Glands.
• Stopping Plugs.
• Accessories.

A10: MARINE SOLUTIONS.
• Navigation Light Systems.
• Helideck Systems.
• Heating Systems.
• Installation Equipments.
• Automation.

A11: AUTOMATION.
• Safety Barriers.
• Isolators.
• Remote I / o.
• Field-bus Technology.
• Operating & Monitoring Systems.

CONTRACT SERVICES: R – STAHL ESACO.
A12: SYSTEMS SOLUTIONS, TECHNICAL & SUPPORT SERVICES.
• Project Management.
• Engineering.
• Quality Assurance.
• Quality Management.
• After Sales Services.
• Seminars & Training Courses.
• Development Services.
• Services of Laboratory Test.

B: FLANGES & FITTINGS , PIPES & TUBES S.S.:( AGENT TO FELIX TECHNOLOGY )
B1: Flanges – Sch. 40, 80 160; Class:150,300,400,600,900,1500,2500; Size: 1’’ to 24’’
B1.1: Flanges Orifice – Class: 300,900,1500, 2500
B1.2: Flanges Long Welding Neck – Class:900,1500.
B1.3: Flanges Reducing –
B1.4: Flanges Ring Joint.
B1.5: Flanges Forged.

B2: PIPES & TUBES – STAINLESS STEEL.
B2.1: Stainless Steel Seamless Instrumentation Tubes – Size: 6mm OD to 25.4mm OD;
Thickness: 0.8mm to 4mm.
B2.2: Stainless Steel Seamless Heat Exchanger Tubes – Size: 10mm OD to 50.8mm OD.
B2.3: Stainless Steel Seamless Pipes: Std: 1/8” NB to 1” NB - Sch. 5S, 10S, 40S, 80S
: Above 1” NB to 4” NB – Sch. 5S & 10S.
: Above 4” NB to 6” NB – Sch 10S.
B2.4: Stainless Steel Welded Instrumentation & Heat Exchanger Tubes – Size: 10mm to
114.3mm OD: -Thickness: 0.9mm to 4mm.
B2.5: Stainless Steel Welded Pipes - 1/8” NB to 1” NB – Thickness: Sch 5S, 10S, 40S, 80S.
- Above 1” NB to 2” nb – Sch 5S, 10S & 40S.
- Above 2” NB to 8” NB – Sch 5S & 10S.

B3: CARBON STEEL SAW PIPES:
B3.1: Long Seam Welded Carbon Steel Pipe: Size: 16” OD to 42” OD; Thickness: 6mm to 25mm.
B3.2: Circle Seam Welded – Size: 32” OD to 102” OD – Thickness: 6mm to 25mm.

B4: STEEL PLATES.
B4.1: Steel Plate – Grade: 304; Thickness: 7.5 to 8mm;WT:4300 to 6200Kg.
B4.2: Steel Plate – Grade: 304L; Thickness: 8 to 10mm; WT:4300 to 6200Kg.
B4.3: Steel Plate – Grade: 321; Thickness: 10 to12; WT:4300 to 6200Kg.
B4.4: Steel Plate – Grade: 304H; Thickness: 12 to 35mm; WT:4300 to 9200Kg.
B4.5: Steel Plate – Grade: 304H; Thickness: 12 to 35mm; WT:4300 to 9200Kg.
B4.6: Steel Plate – Grade: 316 ; Thickness: 8 to 9mm; WT:4300 to 6200Kg.
B4.7: Steel Plate – Grade: 316L; Thickness: 12 to 16mm; WT:4300 to 9200Kg.
B4.8: Steel Plate – Grade: 317L; Thickness: 12 to 16mm; WT:4300 to 9200Kg.
B4.9: Steel Plate – Grade: 316LN; Thickness: 16 to 25mm; WT:4300 to 9200Kg.
B4.10: Steel Plate – Grade: 316LN; Thickness: 25 to 80mm; WT:5800 to 9200Kg.
NOTE: Standard Width (mm): 1000, 1219 (4”), 1524 (5”) , 2000, 2438 (6”) , 3000, 3048 (10”).
Standard Thickness (mm): 9,10,12,15,16,18,20,22,25,28,30,35,40,45,50,60,70,80.

B5: H - BEAM & I - BEAM.
B5.1: Hot Rolled H-Beam; size: 100mm x 100 to 900mm x 300mm.
B5.2: Hot Rolled H-Beam, size: 100mm x 100mm, 125mm x 125mm, 150mm x 75mm, 150mm x
150mm.
B5.3: Hot Rolled H-Beam; size: 200 mm x 100mm, 200mm x 150mm, 200mm x 200mm,
250mm x 125mm, 250mm x 175mm
B5.4: Hot Rolled H-Beam; size: 250mm x 250mm , 300mm x 150mm, 300mm x 200mm,
300mm x 300mm.
B5.5: Welded H-Beam; 200mm x 200mm, 200mm x 204mm, 208mm x 202mm.
B5.6: I-Beam;
B5.7: Built-Up Beam

B6: STAINLESS STEEL BARS & BILLETS
B6.1: Stainless Steel Round Bars; size: 6” OD to 160” OD; Length: 4000/6000.
B6.2: Stainless Steel Angle Bars; size: 25” x 25” x 3” to 100” x 100” x 10”; Length: 10,000.
B6.3: Stainless Steel Hexagonal Bars; size: 17” OD to 60” OD; Length: 4000/6000.
B6.4: Stainless Steel Square Bars; size; 6” x 6” to 80” x 80”; Length:4000/6000.
B6.5: Stainless Steel Flat Bars; size: 3 x 25 to 25 x 70; Length: 4000/6000.
B6.6: Stainless Steel Billets; size: 120 x 120, 122 x 122, 130 x 130, 140 x 140, 160 x 160;Length
6000.
NOTE: S.S. Grade: 304/304L/304H, 310S, 316H, 316L/316H/316TI, 317, 321, 347, 410 e.t.c.
Length: Random Length / Fixed Length up to 15 meters in straight length and up to 24
Meters developed length in U-Tubes.

Applications: Heat Exchanger, Condenser, HP/LP Heated, Boiler, Refrigeration,
Instrumentation, Hydraulics, Fuel Injection, Exhaust Systems for
Automobiles, Furniture Forging e.t.c.

B7: CARBON STEEL BARS & BILLETS
B7.1: Steel Bars; size: 6 OD to 160 OD; Length: 4000/6000
B7.2: Carbon Steel Billets; size: 120 x 120, 130 x 130, 140 x 140, 160 x 160; Length: 4000/6000.

Note: Length: Single Random / Double Random.
Applications: Heat Exchanger, Condenser, HP/LP Heated, Boiler, Refrigeration,
Instrumentation, Hydraulics, Fuel Injection, Exhaust Systems for
Automobiles, Furniture Forging e.t.c.

B8: WELDED & SEAMLESS PIPES – CARBON, ALLOY & STAINLESS STEEL.
B8.1: Welded pipes size 8” to 48”, Dia: 219.08 to 1219.2, Thickness: Sch5s, 10, 20, 30, 40S,
STD, 60, 80S, XS, 100, 120, 140, 160, and XXS. ANSI B36.10 and B36.19
B8.2: Seamless Pipes Alloy; size: 8” to 48” , Dia 219.08 to 1219.2; Thickness: Schd5S, 10, 20, 30
40S, STD, 60, 80S, XS, 100, 120, 140, 160 and XXS. ANSI B36.10 and B36.19
B8.3: Seamless Pipes Alloy; size 8” to 48”; Dia 219.08 to 1219.2; Thickness: Schd 5S, 10, 20, 30,
40S, STD, 60, 80S, XS, 100, 120, 140, 160 and XXS. ANSI B36.10 and B36.19
B8.4: Seamless Stainless Steel; size: 8” to 48”; Dia: 219.08 to 1219.2; Thickness: Schd 5S, 10, 20
30, 40S, STD, 60, 80S, XS, 100, 120, 140, 160 and XXS. ANSI B36.10 and B36.19.

B9: FITTINGS:
B9.1: ELBOWS 45 DEGREE.
B9.1.2: ELBOW 90 DEGREE
B9.2: TEES.
B9.3: REDUCERS CONCENTRIC.
B9.3.1: REDUCERS ECCENTRIC.
B9.4: CUP

C : DR. STHAMER FIRE FIGHTING FOAM CONCENTRATES, EQUIPTS & WEARS (AGENT)

C1: SYNTHETIC AQUEOUS FILM FORMING – ( AFFF) FIRE FIGHTING FOAM CONCENTRATES.

C2: FILM FORMING FLUORO PROTEIN ( FFFP) FIRE FIGHTING FOAM CONCENTRATE.

C3: MOUSOL FIRE FIGHTING FOAM CONCENTRATE.

C4: FIRE TENDER / TRUCKS.

C5: FIRE FIGHTING WEARS:
Fire Suits, Boots, Cover all, Hand gloves, Helmet, Eye Goggle, Ear Muff, Respiratory Breathing Apparatus & Oxygen Cylinder.

C6: FIRE FIGHTING EQUIPMENTS.

C6.1: FIRE EXTINGUISHERS
CO2 Fire Extinguishers, Dry Powder Extinguishers, Wheel Fire, Extinguishers, Water Extinguishers , Wet Chemical Fire Extinguishers & Spray Foam Fire Extinguishers

C6.2: FIRE MAN EQUIPMENTS.
Fire Hose Reel, Fire Blankets, Fire Escape Equipment, Fire Alarm Systems, Fireman Axe, Couplings & Adaptors and Pressure .Reducing Valves.

C6.3: FIRE EQUIPMENT PROTECTION & DETECTION SUPPORT ACCESSORIES:
Fire Extinguisher Stand, Storage & Protection Services, Fire medical first Aid Equipments,
Site Alarm & Detection Systems, Fire Safety Signs, Fire Warden / Marshal Waist Coat,
Domestic fire escape ladder, Fire Smoke Detector Systems, Sounder & Beacon, Burn-shield
and Emergency Burn Care Medical Kit.

D: AAF - GAS TURBINE IN - LET FILTERS. (BOYEWA / NIGERIAN AGENT CO-OPERATIONS )

D1: AAF – AMAIR PLAST GT: Pre-filter for Rotating Machinery.
• Pre-filter for Turbine barriers filter.
• Light weight and easy to install
• Low average operating resistance.
• Plastic frame for highest moisture resistance.

D2: AAF – AMER GLAS M57: Air Filter Media.
• Glass fibre filter media with Progressive density.
• Available in Pads and Rolls.
• High dust holding capacity.
• Easy to install.

D3: AAF – AMERKLEEN M80: Disposable Glass Fibre Filter Media Pad.
• Glass fibre Pad with progressive density.
• Strong resilient design.
• Impregnated with gel – like adhesive.
• High dust holding capacity.
• Disposable.

D4: AAF – AMERKOOL M81: Demister Coalescing Pad.
• Low pressure drop.
• Economical in use.
• Long service life.

D5: AAF – AMERKOOL III: Evaporative Cooler.
• High and Dry humidification Quality.
• Reduced maintenance cost.
• Lomg service life.
• High efficiency filter.

D6: AAF – AMERKOOL GT: Coalescer for Rotating Machinery.
• Coalescer for Turbine barrier filter.
• Light weight and easy to install.
• Low average operating resistance.
• Plastic frame for highest moisture resistance.

D7: AAF – META NET: Light weight Metal Filters for heavy duty applications and HVAC Systems.
• Reduces maintenance cost.
• High dust holding capacity and long service life.
• Light weight and easy to install.
• Washable.
• Average resistances : 75 % – 85% according to EN 779.

D8: AAF – DRIPAK GT: A Pre filter for Rotating Equipments.
• High Capacity.
• Reduced pressure loss.
• Self supporting pockets.
• Plastic header.
• Fully incinerable.

D9: AAF – VARICEL VXL: High efficiency compact filter for HVAC Systems.
• Classification F6, F7, F8, & F9 to EN 779:2002.
• Excellent performance in difficult operating conditions.
• High capacity: 3000 to 5000 m3/h.
• Light weight and easy to install.
• Fully incinerable.

D10: AAF – ASTROCEL III 4000: High Efficiency Particulate Air Filters.
• H12, H13 & H14 in accordance with EN 1822.
• 4000m3/h Air volume saves space.
• Low energy consumption.

D11: AAF – DURACEL XL: High Efficiency Cartridge Filter.
• Light weight, easy to install.
• Low average operating resistance.
• Longer life than standard filters.
• Less filter change – out.

D12: AAF - DURAVEE HXL: High Capacity, High Efficiency Barrier Filter for Rotating Machinery.
• High Efficiency and dust holding capacity.
• Extended media area.
• Water resistant media.
• Sturdy construction.
• Fully incinerable.
• Free from Halogens.

D13: AAF – DURAVEE XL: High Efficiency Barrier Filter for Rotating Machinery.
• High efficiency and dust holding capacity.
• Water resistant media.
• Extended media area.
• Water resistant media.
• Sturdy construction.
• Fully incinerable.

D14: AAF – HYDROCEL - CLEAN AIR FOR GAS TURBINES.
• Refined filtration against Salt and Sea water.
• Reduced maintenance cost.
• Achieve constant full load capacity.

D15: AAF – HYDROVEE: HIGH CAPACITY HIGH EFFICIENCY FILTERS ROTATING MACHINERY APPLICATIONS.
• Long life capacity.
• F6 to H12 Filter efficiency range with special water and hydrocarbon resistant media.
• All plastic construction.
• Fully incinerable.
• Easy fit unique built-in latching systems.
• Standard 300mm deep or high capacity 450mm deep products.

D16: AAF – ASC: SELF CLEANING IN-TAKE FILTER SYSTEMS.
• Contributes to acoustic attenuation.
• Low operating pressure drop.
• Self cleaning.
• Factory assembled.

D17: AAF – CROSS FLOW: FILTERING CARTRIDGES INTAKE FILTER SYSTEM.
• Self cleaning system.
• Factory assembled.
• Contributes to acoustic attenuation.
• Low operating pressure drop.

D18: AAF – D POWER PAK: AUTOMATIC SELF CLEANING DRY AIR FILTER.
• Intake filter for : – Gas Turbines.- Blowers. - Compressors - Diesel Engines.
• Self Cleaning.
• Few maintenance.

D19: AAF – DUST LOUVRE: INERTIAL SEPARATOR: Pre filter for Air - Conditions and Ventilating Systems in Heavy Industrial Conditions.
• Factory assembled for easy on site installation.
• Self cleaning operation.
• Low Airflow resistance.
• Long service life.
• Up to 92% arrestance on Dust Coarse and sand storms operational areas.

D20: AAF – MULTI – DUTY – AUTOMATIC SELF – CLEANING VISCOUS AIR FILTER.
• Efficiency 77% Ashrae gravimetric.
• Low and constant pressure drop.
• Self cleaning filter.
• Heavy duty.
• Economic for use.
• Constant filtration efficiency.
• Maintenance extremely reduced.
• Auto replacement of the filter Area.

E: BALDWIN AIR, FUEL & LUBE OIL FILTERS FOR HEAVY DUTY GENERATORS, ENGINES, PUMPS & VEHICLES ( AGENT TO BALDWIN)

E1: Diesel Fuel Filters & Water Separators.

E1.1: 100 Series DAHL Diesel Fuel Filters & Water Separator
– Used on small Diesel and Petrol Engines Up to 200HP, Cars, Light Duty Trucks and Small Generators.

E1.2: 150 Series DAHL Diesel Fuel Filters & Water Separators
– Used on Small and Medium Detroit
Diesel & Cummins six ( 6 ) Cylinder Engines.

E1.3: 200 Series DAHL Diesel Fuel Filters & Water Separators
– Used on 8 Cylinder Cummins & Detroit Diesel Engines and other Diesel Engines up to 1000HP, Caterpillar Generators & Engines up to 1000 HP, Trucks & Buses, Construction Equipments, medium size Generators and Small commercial
Boats.

E1.4: 300 Series DAHL Diesel Fuel Filters & Water Separators
– Used on 12 & 16 Cylinder Cummins & Detroit Engines up to 800 HP, EMD & ALCO Engines Up to 2000 HP, Large Boats & Generators,
Large Stationary Engines.

E1.5: 500 Series Tank Diesel Fuel Filters & Water Separators.
- Used on Large Marine Diesel Engines,
Storage Facilities, Fuel Storage Tank Pumps and Large Stationary Engines.

E1.6: DAHL 300 HYDRAULIC RECYCLERS -
The DAHL Hydraulic Recyclers are specifically designed to remove emulsified water from hydraulic oils. Since water emulsified in hydraulic oil is not removed by the normal.
DAHL coalescing action, Baldwin has designed a special filter element that absorbs water that has been emulsified in oil.
The water remains in the filter element until the element is disposed. As the element absorbs water, the filtering media expands, increasing the restriction in the filter.
By monitoring the pressure differential of the element, it is possible to determine when the element is saturated.
Two unique DAHL elements have been developed:

E2: Fuel Filters. - Used on Cummins Engines, Diesel Engines ,Trucks, Vans, Cars, Tractors and Heavy Duty Construction Equipments & Engines, Caterpillar Generators , Marine Craft and Diesel Engines.

E3: Air Filters - Used on Cummins Engines, Diesel Engines ,Trucks, Vans, Cars, Tractors and Heavy Duty Construction Equipments & Engines, Caterpillar Generators , Marines Craft and Diesel Engines.

E4: Lube Oil Filters / Elements – Used on Cummins Engines, Diesel Engines ,Trucks,Vans, Cars,Tractor and Heavy Duty Construction Equipments & Engines, Caterpillar Generators, Marine Craft and Diesel Engines.

E5: Coolant - Used on all Diesel / Fuel Engines for Trucks, Cars, Vans , Construction Equipments e.t.c.

F: DELTA-NEU CENTRIFUGAL FAN (AGENT TO DELTA – NEU )

F1: Cobra Centrifugal Fan – for Diesel / Fuel underground Tank.

F2: DUST CONTROL.
F2.1: Dust Extraction with a Dry or Wet filtration Systems.
F2.2: Centralised Vacuum Cleaning.
F2.3.: Mobile Vacuum Cleaning.

F3: INDUSTRIAL VENTILATION:
F3.1: Heat Extraction & Cooling.
F3.2: Pressurisation of Production Place.
F3.3: Fume & Oil Mist Extraction.
F3.4: Product Cooling.

F4: PNEUMATIC WASTE HANDLING:
F4.1: Card Board.
F4.2: Paper.
F4.3: Plastic.
F4.4: Metal.
F4.5: Textile.
F4.6: Packing.

F5: FILTRATION.
F5.1: Oil Mist.
F5.2: Fume.
F5.3: Filtration.

G: LUFKINS GEAR BOXES:

G1: OIL FIELD PUMPING UNITS
• Automation Controls.
• Beam Pumping Unit.
• Hydraulic Pumping Unit.
• Gas Lift.
• Plunger Lift.
• Completion Equipment.
• Hydraulic Submersible Pump.
• Production Optimization.

G2: POWER TRANSMISSION UNITS.
• Gear Units.
• Couplings.
• Bearings.

H: HACKMAN METOS KITCHEN & GALLEY EQUIPMENTS:

Hackman Kitchen Cooking Products and Galley Equipments are suitably used in Offshore Oil & Gas Operations, FPSO Deep Sea operations, Industrial Kitchens, Company Kitchen & Restaurant, Guest Houses, 5-STAR Hotels e.t.c.

H1: FOOD PREPARATION EQUIPMENTS:
• Vegetable Cutter Slicers.
• Combi Cutters.
• Scales.
• Peeling & Washing Machine.
• Meat Blocks.
• Cutting Boards.
• Can Openers.
• Slicing Machines.
• Hand Mixers.
• Bear Varimixers.
• Blinders.
• Meat Mincers
•
H2: COOKING EQUIPMENTS:
• Proveno and Accessories.
• Culino Combi & Accessories
• Viking & Accessories.
• Futura Marvel Pressure Steamer & Accessories.
•
H3: OVENS:
• LU-KO Bakery Ovens.
• Convection Ovens.
• Roasting Ovens.
• Microwave Ovens.
• Conveyor Ovens.
• Pizza Ovens.
• Chef Ovens.

H4: RANGES & BRATT PANS:
• Electric Ranges.
• Induction Ranges.
• Bratt Pans.
• Grill Series.
• Woks.
• Cooking Plates.

H5: GRILL & RESTAURANT EQUIPMENTS:
• Induction Griddles.
• Vapor Grill
• Fryers.
• Heating Lamps.
• Toasters.
• Contact Grills.
• Sausage Steamers.
• Hot Dog Steamers.
• Salamanders.

H6: BAR EQUIPMENTS:
• Bar Systems.
• Shakers Blenders.
• Lemon Juicers.
• Ice Flakers.
• Juice Dispensers.
• Ice Cube & Crushers.
• Ice Cube Makers.
• Bar Counters.
H7: COFFEE BREWING MACHINES
• Fully Automatic Coffee Machines.
• Espresso Machines.
• Urn Models.
• Glass Jug Models.
• Water Boilers.

H8: FOOD SERVICE EQUIPMENTS:
• GN Containers.
• Heated Plates.
• Cold Plates.
• Soup Warmer Serving Dishes.
• Drop –in Serving.
• Cold Drawer Cupboards & Counters.
• Bain Maries.
• Plate and Water Dispensers.
• Glass Displays.

H9: COLD CABINET & ROOMS:
• Refrigerators Freezers.
• Temperature Altering Cabinets.
• Blast Chillers.
• Ice Cube Makers.
• Crushed Ice Makers.
• Ice Flake Makers.
• Ice Bin for Ice Cube, Crush & Flake Makers.
• Ice Cube Dispensers.
• Trolleys for Ice Cubes & Crush.

H10: DISH WASHING MACHINES.
• Dishwashers.
• Pre-wash Showers.
• Pre-wash & Un-loading Tables.
• Waste Disposers.
• Granule Washers.
• Conveyor Machines.
• Pre-Rinse Machines.
• Flight- Type Washers.
• Dish-Washing Baskets.
• Sorting Units.

H11: TROLLEYS, TABLES & SHELVES:
• Trolleys.
• Waste Trolleys.
• Tables.
• Wall Shelves.

H12: LAUNDRY EQUIPMENTS:
• Washer Extractors.
• Tumble Dryers.
• Roller Ironers.

I: EXPLORATION & SEISMIC SERVICES – ( EXPLOTECH AGENT ).
• Instantel Digital Seismographs ( Instantel Products).
• Blast Analysis Instrumentation.
• Blastware Products.
• Explosive Works.
• Inspection of Blast and Construction Site.
• Blast Services.
• Hydro – Electric Projects.
• Demolition of Heavy Duty Structures.
• Blast Design, Control and Monitoring of Blast.
• Vibration & Over pressure Monitoring.
• Damage criteria determination for Vibration, over pressure and Flyrock.
• Pre Blast & Post Blast Investigation.

I.1: MINING & TUNNELING:

Blast Services provided to underground and open PIT MINING as well as QUARRYING include:
• Blast Design – to address Areas of specific goals; such as IMPROVED FRAGMENTATION, REDUCED DILUTION and ENVIRONMENTAL IMPACT.
• Vibration Signature Analysis and diagnostics.
• Blast Performance Evaluation and Optimization.
• Fragmentation Analysis.
• Environmental Impact Analysis.
• Damage criteria determination for Vibration, Over Pressure and Flyrock.
• Vibration and Over-pressure monitoring are provided remotely via Modems.
• VOD Monitoring.

1.2: MARINE AND MAINLINE PIPE LINE OPERATIONS.
• Marine – Pipe Line River Crossing and underwater Pipe Line Operations.
• MainLine – PipeLine operations.
• Station Modification & Upgrading.
• Blast Design, Control and Monitoring.
• Vibration and Over pressure Monitoring.
• Pre-Blast & Post Blast Inspections.
• Damage criteria determinations for Vibrations, Flyrock & Over Pressure.
• Blast Safety and general Blast information for PipeLine Inspections.
• Blast Damage Claims & Investigations..

1.3: INSTANTEL INFORMATION AND INSTANTEL PRODUCT LINE.
1,4: TRAINING:
• Blasting.
• Vibration Monitoring.
• Custom Information Seminars on Blasting & Related Issues.

J: CONTROL VALVES , METERING & INSTRUMENTATION EQUIPMENTS.

J.1: CONTROL VALVES:
• Ball Valves.
• ButterFly Valves.
• Gate Valves.
• Globe Valves.
• Needle Valves.
• Plug Valves.

J.2: METRING EQUIPMENTS.
• Flow Meters
• Transmitters
• Pressure Guages

J.3: INSTRUMENTATION EQUIPMENTS:
• Pressure Instruments.
• Temperature Instruments.
• Level Instruments.
• \Flow Instruments.

K: PUMPS.

K.1: Reciprocating Pumps.

K.2: Submersible Pumps.

k.3: Centrifugal Pumps.

1 PLANT & MACHINERY, ENGINE GAS, OIL & PARTS (EUROPE), ENGINE GAS, OIL & PARTS (U.S)
2 GAS TURBINE SPARE- PARTS AND FILTERS.
3 COMPRESSORS VACUMM PUMP & PARTS
4 PUMPS, RECIPROCATING, SUBMERSIBLE, ROTARY & PARTS
5 PRESSURE, TEMPERATURE, LEVEL , PROCESS & FLOW INSTRUMENTS
6 METERING, MONITORING, DISTRIBUTION EQUIPMENT & CONTROL PANELS
7 LAMPS, LUMINARIES, LIGHTINGS & CONTROL GEARS
8 CARS, BUSES, VANS, LORRIES, TRAILERS & SPAREPARTS.
9 TUBINGS , LINE PIPES, ELBOWS, TEES,MILD STEEL PLATES, RODS & FLANGES
10 MARINE HOSES AND HOSES ASSEMBLY
11 VALVES - GLOBE, BALL, GATE, GLOBE, BUTTERFLY, PLUG & ACCESSORIES
12 LAUDRY & GALLEY / KITCHEN EQUIPMENTS & ACCESSORIES
13 DIESEL, FUEL, KEROSENE, ENGINE OIL & OIL PRODUCTS
14 COMPRESSORS, CENTRIFUGAL FANS FOR UNDERGROUND DIESEL / FUEL TANKS.,
15 FIRE & SAFETY EQUIPMENT AND PERSONAL PROTECTIVE EQUIPMENT [PPE]
16 WIRE-ROPES, CORDAGE, CHAINS & SHACKLES
17 PLUG & SOCKETS, SWITCHES, JUNCTION BOXES & CIRCUIT BREAKERS.
18 ELECTRIC CABLES, SOCKETS, LAMPS, CONVERTERS AND TRANSFORMERS.
19 JOINTING GASKET, PACKINGS & INSULATING MATERIALS.
20 OFFICE FURNITURE & FIXTURES, CONSUMABLES, HOUSEHOLD UTENSILES & CLUB REQUISITE
21 CCTV CAMERAS, ELECTRONICS HOUSE HOLD CONSUMABLES & TELECOMS
22 FIRE FIGHTING FOAMS. FIRE EXTINGUISHERS, FIRE ALARMS AND EMERGENCY LIGHTINGS
23 CENTRAL HEATING, AIR CONDITIONING & REFRIGERATOR
24 WATER TREATMENT PLANT
25 BURNERS, IGNITION UNITS
26 GENERATORS SALES AND SERVICING & SPARES PARTS
27 MARINE CRAFT, LIFE RAFTS, SPEED BOATS AND OFFSHORE INSTALLATION
28 TIMBERS, WOODWORKS, SAWING & PLANNING MACHINES & ACCESSORIES
29 MACHINERY ACCESSORIES & TRANSMISSION
30 PROCESS INSTRUMENTS & PARTS AND CONTROLS.
31 BUILDING, STRUCTURE AND TANKS
32 LUB OIL FILTERS, AIR FILTERS, FUEL FILTERS AND DIESEL / FUEL FILTER WATER SEPARATOR
33 GARAGE, RETAIL & GENERAL SHOP OUTLET
34 TYRES, TUBES, BELTS, V-BELTS AND MOTOR SPAREPARTS.
35 PLUG SOCKETS, SWITCH CONTROL GEAR & ELECTRIC INSTRUMENT WIRES, CABLES AND CONNECTING MATERIALS
36 KITCHEN COOKING EQUIPMENTS & ACCESSORIES
37 TURBINE FILTERS, FILTERS – OIL, FUEL, WATER & AIR.
38 LUFKINS GEARS, PUMPS & ACCESSORIES
39 REXNORD COUPLINGS,
40 PROCESS INSTRUMENTATIONS, TRANSMITTERS & CHARTS
41 CIVIL ENGINEERING
42 MECHANICAL ENGINEERING
43 STAHL ESACO ELECTRICAL EXPLOSION PROTECTION PRODUCTS/ ELECTRONIS ENGINEERING
44 VENTILATION / HEATING SANITARY SERVICES
45 WELDING AND JOINTING SERVICES
46 SURFACE TREATMENT,SANDBLASTING, PAINTING, COATING AND FIRE PROOFING SERVICES.
47 TIMBERING & WOOD WORK / TIMBER MACHINERY AND ACCESSORIES
48 CENTRAL HEATING, AIR-CONDITIONING AND REFRIGERATING SERVICES.
49 MARINE CRAFT, LIFE RAFTS, SPEED BOATS SERVICES.
50 INVENTORY MANAGEMENT & STOCK CONTROL / STOCK CHECKING.

We promise Prompt Delivery, Manufacturer’s best Price and Original and Brand New Equipments and Spareparts direct from the manufacturer ‘s factory to your designated Warehouse and Field Location.
We thank you and looking forward to your kind Patronage and Support in the year 2013 and many more years to come.